PROGRAMMING YOUR
THERMOSTAT
6
Press and release. The display
shows 1:00 PM MON.
Press and hold until the current
day appears in the display.
Press and hold until the current
time appears in the display. Be
sure AM or PM appears as
desired.
You have programmed the
current day and time. Go on to
Step 2.
STEP 1
SET THE CURRENT DAY
AND TIME
You can program this thermostat either
on the wall or in your hand. SEE PAGE
31 TO FIND OUT HOW TO REMOVE
THE THERMOSTAT FROM THE
WALL.
Always press the keys with your
fingertip or similar blunt tool. Sharp
instruments like a pen or pencil point
can damage the keyboard.
NOTE: Check the glossary, page 35, for
definitions of unfamiliar words.
MON
PM
M5015
SET
PRESENT
DAY/TIME
DAY
AHEAD
BACK
TUE
M5016
PM
TUE
PM
M5017
To Next Page
Loading...
Need help?
General
