OPERATING YOUR THERMOSTAT
CHECKING THE CURRENT
TEMPERATURE SETTING
Press a single key to compare current
room temperature to the current
temperature setting at any time.
Press and release. The display
will show the current temperature
setting for several seconds, then
revert to the room temperature.
During recovery from energy
savings, the setting displayed will
not match the programmed
setting. This is because the
thermostat gradually changes the
temperature setting during
recovery to provide most efficient
use of the heating or cooling
equipment.
PRESENT
SETTING
ON HEAT
SET
PT
M5057
29
To Next Page
Loading...
Need help?
General
