PRODUCT DATA
TC500A Commercial Thermostat
CONNECTED DEVICE FOR COMMERCIAL BUILDINGS
APPLICATION
TC500A-N/TC500A-W Thermostat is an advanced,
configurable, connected device for commercial buildings.
It controls and monitors Rooftop Unit, Heat Pump
equipment, and their configurations. This device
communicates over Wi-Fi, Bluetooth, Sylk, and easily
integrates with the building automation system.
The built-in intelligent control algorithms of the device
help to achieve the perfect balance between Energy
Efficiency and Comfort. The device is packaged with
numerous presets suitable for most commercial building
requirements that enable the easy and quick initial setup.
The firmware of the device can be upgraded via Wi-Fi
network. The device has four universal terminals and a
pair of Sylk terminals to connect with sensors or other
accessories. It also has a built-in temperature sensor,
humidity sensor, and proximity sensor.
Users can connect to the thermostat via Wi-Fi with the
Honeywell Connect Me app. The Honeywell Connect Me
app gives authorized users access to the Honeywell TC500
Thermostats in their commercial buildings. They can
remotely monitor sites, schedules, settings, and override
controls. Users can add and configure devices, manage
users and more – all from a mobile device.
FEATURES
• Easily customizable and intuitive user interface.
• Multiple, configurable, levels of user privilege access
for features such as Occupancy set points, Date/Time,
Schedules, Calendars of special events, remote and
local Manual Override, remote and local Occupancy
Override, Choice of language and units, and screen
lockouts to prevent unauthorized settings changes.
• Advanced commercial control algorithms such as auto
changeover, pre-occupancy purge, power-up disable
time, freeze protection, demand limit controls, and
same reliable optimized recovery methods established
over decades of use.
• Settings to switch Fahrenheit to Celsius and vice-versa.
• Heat set points are limited automatically between 40°F
to 90°F and cool set points are limited automatically
between 50°F to 99°F
• Auto display goes into sleep mode when there is no
user action.
• A LED indicator to show the operational status of the
thermostat when the display goes to sleep mode.
• Real-Time Clock time keeping accuracy with 72 hour
retention during power loss.
• Thermostat can be configured via HMI or BACnet IP.
• BACnet settings can be configured via HMI.
Equipment Control Features
• 5H/3C Heat Pump, 3H/3C Conventional and
modulating heat system
• Constant speed Fan, 2-speed Fan, and Variable Speed
Fan
• Packaged Economizer Enable Output
• Multiple Dehumidification and Humidification options
• Service mode to manually command the outputs to test
the operation of the mechanical equipment
• Auto mode to switch between heating and cooling
according to the current space temperature
• Staging control, PID Tuning, CPH, OAT Lockout, DAT
Lockout, Modulating control
• Demand Limit Control to save energy
• System Switch Options
• Smoke Monitor
To Next Page
Need help?
General
