5. Update the telnet port number if your host application is
configured to listen on a specific port. If not, use the default
telnet port.
6. Select OK.
7. Select Session > Connect from the application menu or tap the
Connect button on the Tool Bar.
8. Upon a successful connection, the host application screen is
displayed.
To change options (e.g., Display, Colors, Cursor, Bar Code), refer to
the RFTerm Reference Guide, available at www.honeywellaidc.com,
for further information about these and other features.
Rebooting the Thor VM1
To warmboot the Thor VM1 with Windows CE 6.0:
1. Select Start > Settings > Control Panel > Registry.
2. Tap the Warmboot button.
To warmboot the Thor VM1 with Windows Embedded Standard:
1. Select Start > Shutdown > Restart to reboot.
When the Thor VM1 is booting, there may be small delays while the
wireless client connects, applications launch, remote management
completes and Bluetooth devices connect.
To Next Page
Loading...
Need help?
General
