PRODUCT DATA
60- 2309- 10
® U.S. Registered Trademark
Copyright © 2001 Honeywell • All Rights Reserved
V4055A,B,D,E
On-Off Fluid Power
Gas Valve Actuator
APPLICATION
The V4055 Gas Valve Actuator, in combination with a V5034,
VE5000
a
, V5055 or V5097 Gas Valve, controls the gas supply
to commercial and industrial burners.
FEATURES
• The V4055 Actuator, when used with the V5034,
VE5000
a
, V5097 or V5055 Valve, is rated for final safety
shutoff service.
• The V4055 Actuator can be used with the characterized
guide model of the V5055 or V5097 Gas Valve to
enhance lightoff smoothness.
• The standard model has an opening time of
26 seconds at 60 Hz or 32 seconds at 50 Hz. A
fast-opening model is available with timings of
13 seconds at 60 Hz or 16 seconds at 50 Hz.
• Maximum closing time is one second, which meets
code, standard and insurer requirements.
• Models available with damper shaft, with or without
spring return; shaft extends out both sides and rides
in Teflon-like Delrin bushings; used with standard
7616BR Damper Crank Arm.
• Red OPEN indicator attached to actuator stem shows
when valve is even slightly open; yellow SHUT
indicator on valve stem shows only when gas valve is
fully closed.
• Models available with adjustable max flow limit switch.
• Ambient temperature rating is -40°F to +150°F (-40°C to
+66°C) for 60 Hz models and -10°F to +158°F (-23°C to
+70°C) for 50 Hz and 50/60 Hz models.
• Valve and actuator combinations can be mounted in
any position, with the exception of the 220 to 240 Vac,
50/60 Hz models, which are mounted vertically.
• Models available with factory-installed single pole
double throw (spdt) field-adjustable Auxiliary Switch.
Field-addable Auxiliary Switch kits are also available.
• Standard enclosure meets NEMA 1 (IP30)
requirements; models available with NEMA 4
weatherproof enclosure.
• V4055D and high pressure V4055E with
Proof-of-Closure Switch and V5055/V5097C or E with
valve seal overtravel interlock (double seal) to meet
specific code, standard and insurer requirements.
a
VE5000 is a European manufactured and approved valve for
European use only.
Contents
Application ........................................................................ 1
Features ........................................................................... 1
Specifications ................................................................... 2
Ordering Information ........................................................ 2
Installation ........................................................................ 5
Wiring ............................................................................... 7
Checkout and Service ...................................................... 8