Honeywell VERSAFLOW MAG 1000 - Page 16

2 INSTALLATION
16
VERSAFLOW MAG 1000
www.honeywellprocess.com 34-VF-25-54 iss.3 GLO July 14 US
Nominal DN
[mm]
Pressure
rating
Bolts Max. torque [Nm]
Polypropylene Hard rubber
25 PN 40 4 x M 12 22 11
32 PN 40 4 x M 16 37 19
40 PN 40 4 x M 16 43 25
50 PN 40 4 x M 16 55 31
65 PN 16 2 x M 16 51 42
65 PN 40 8 x M 16 38 21
80 PN 40 8 x M 16 47 25
100 PN 16 8 x M 16 39 30
125 PN 16 8 x M 16 53 40
150 PN 16 8 x M 20 68 47
200 PN 10 8 x M 20 - 68
200 PN 16 12 x M 20 - 45
250 PN 10 12 x M 20 - 65
250 PN 16 12 x M 24 - 78
300 PN 10 12 x M 20 - 76
300 PN 16 12 x M 24 - 105
350 PN 10 16 x M 20 - 75
400 PN 10 16 x M 24 - 104
450 PN 10 20 x M 24 - 93
500 PN 10 20 x M 24 - 107
600 PN 10 20 x M 27 - 138
700 PN 10 20 x M 27 - 163
800 PN 10 24 x M 30 - 219
900 PN 10 28 x M 30 - 205
1000 PN 10 28 x M 35 - 261
1 The specified torque values are dependent on variables (temperature, bolt material, gasket material,
lubricants, etc.) which are not within the control of the manufacturer. Therefore the values should be re-
garded as indicative only.
2 DN65 / PN16 is available with standard 8 bolt holes. On request 4 bolt holes is optional.
INFORMATION!
Other sizes / pressure ratings on request.