Quick Start

For initial set up, we strongly recommend the use of the relevant manuals in addition!

07/2019 - 4007779101 - 34-VF-25-76 iss.1 GLO July 2019 US

VERSAFLOW VORTEX 200

Vortex flowmeter

Installation, assembly, start-up and maintenance may only be performed by appropriately

trained personnel.

For use in hazardous areas, special codes and regulations are applicable which are supplied in

a separate document that describes all hazardous area relevant information.

The responsibility as to the suitability, intended use and corrosion resistance of the used

materials against the measured fluid of this device rests solely with the operator.

For complete documentation (manuals, supplementary manuals, data sheets and certificates)

please refer to www.honeywellprocess.com.

1 Installation

Liquids

Steam & gases

Sandwich design – centering rings

Centering rings

(part of scope of supply)

Transport

Pipelines with control valve

Remote: wall mounting of the field housing

Remote: pipe mounting of the field housing



5 DN

Honeywell VERSAFLOW VORTEX 200 - Page 18

Other manuals for Honeywell VERSAFLOW VORTEX 200