– 57 –
System Features Log (cont’d)
User Setup (cont’d)
Enter system/partition master code + [8] + user no. + “#” command listed in column heading.
User
No.
*
User
Name
User’s Part(s).
(system master only)
[#] [3] + part(s) + [#]
Security
Code
enter new code
Auth.
Level
[#] [1] + level
Access
Group
[#] [2] + group
RF Zone
Number
[#] [4] + zone no.
Pager
on/off
[#] [5] + 0/1
33 partition 2 master (2) (4) (1)
34 (2) (0) (1)
35 (2) (0) (1)
36 (2) (0) (1)
37 (2) (0) (1)
38 (2) (0) (1)
39 (2) (0) (1)
40 (2) (0) (1)
41 (2) (0) (1)
42 (2) (0) (1)
43 (2) (0) (1)
44 (2) (0) (1)
45 (2) (0) (1)
46 (2) (0) (1)
47 (2) (0) (1)
48 (2) (0) (1)
49 (2) (0) (1)
Authority Levels: 0 = standard user Partitions: 0 = clears partition 1 and partition 2 defaults
1 = arm only 1 = partition 1 and common
2 = guest 2 = partition 2 and common
3 = duress 3 = common partition only
4 = partition master Paging: 0 = no paging; 1 = allow paging
* Users 34-49 apply to VISTA-20P Series only; user 33 is partition 2 master for VISTA-20P Series, and the last user for
VISTA-15P Series.
Paging Setup
Automatically Reports Upon… Sched. Func. Key
open/close alarm/trouble zone list
Pager
Pager Phone Number\
Prefix Characters
p1 p2 p1 p2 p1 p2
1
2
3
**
4
**
** Pagers 3 and 4 and partitions apply to VISTA-20P Series only.
National Security Systems Inc (800) 457-1999
To Next Page
Loading...
