Honeywell Xenon CCB-H-010BT User Manual

Unlinking the
Scanner
11
If the base has a scanner linked to it, that scanner must be
unlinked before a new scanner can be linked. Once the previous
scanner is unlinked, it will no longer communicate with the
base. Scan the Unlink Scanner bar code to unlink a
scanner.
Trigge
r
Unlink Scanner
The following bar codes will allow you to use the scanner in
Manual Trigger - Normal Mode (need to press the
trigger to read) or Presentation mode (the scanner is
activated when it “sees” a bar code).
Note: Presentation Mode continuously draws power, so use of
the external power supply is recommended for this mode.
Manual Trigger - Normal
(Default)
Presentation Mode

Honeywell Xenon CCB-H-010BT Specifications

General

Brand	Honeywell
Model	Xenon CCB-H-010BT
Category	Barcode Reader
Language	English