Honeywell Xenon CCB-H-010BT User Manual

1
Agency Model: 1952/1952-BF/ CCB-H-010BT/ CCB-H-010BT-BF
Note: Refer to your User Guide for information about
cleaning your device.
Getting Started
Turn off computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
When the base is connected and powered up, put the scanner in
the base to establish a link. The green LED on the base flashes
to indicate the scanner’s battery or charge pack is charging.
Power Supply Assembly (if included)
Note: The power supply must be ordered separately, if needed.

Honeywell Xenon CCB-H-010BT Specifications

General

Brand	Honeywell
Model	Xenon CCB-H-010BT
Category	Barcode Reader
Language	English