Xenon XP User Guide 169
Character Replacements on page 304), and scan the value and the Save barcode
from the Programming Chart, beginning on page 311. The data characters should
then appear properly.
GS1-128
<Default All GS1-128 Settings>
GS1-128 On/Off
GS1-128 Message Length
Scan the barcodes below to change the message length. Refer to Message Length
Description (page 152) for additional information. Minimum and Maximum
lengths = 1-80. Minimum Default = 1, Maximum Default = 80.
To Next Page
Loading...
