Xenon XP User Guide 183
Don’t Require 2 Digit Addenda: If you have selected Require 2 Digit Addenda, and
you want to disable this feature, scan Don’t Require 2 Digit Addenda. EAN-13
barcodes are transmitted, depending on the setting you are using for EAN/JAN-13
Addenda Required.
Default = Don’t Require 2 Digit Addenda.
EAN-13 Beginning with 978 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
barcodes that begin with “978.” The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 barcodes that begin with “978” must have a
5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then
transmitted as a single, concatenated barcode. If a 5 digit addendum is not found
within the Addenda Timeout period, the EAN-13 barcode is discarded.
Don’t Require 5 Digit Addenda: If you have selected Require 5 Digit Addenda, and
you want to disable this feature, scan Don’t Require 5 Digit Addenda. EAN-13
barcodes are transmitted, depending on the setting you are using for EAN/JAN-13
Addenda Required.
Default = Don’t Require 5 Digit Addenda.
EAN-13 Beginning with 979 Addenda Required
These settings program the scanner to require a 5 digit addenda only on EAN-13
barcodes that begin with “979.” The following settings can be programmed:
Require 5 Digit Addenda: All EAN-13 barcodes that begin with “979” must have a
5 digit addendum. The EAN-13 barcode with the 5 digit addendum is then
transmitted as a single, concatenated barcode. If a 5 digit addendum is not found
within the Addenda Timeout period, the EAN-13 barcode is discarded.
* Don’t Require 2 Digit Addenda
* Don’t Require 5 Digit Addenda
To Next Page
Loading...
