Honeywell Xenon XP 195 Series - Page 289

Xenon XP User Guide 271
Korea Post Msg. Length Minimum (2 - 80) *4 KPCMIN## 213
Maximum (2 - 80) *48 KPCMAX## 213
Korea Post Check Digit Transmit Check Digit KPCCHK1 213
*Don’t Transmit Check Digit KPCCHK0 213
Imaging Default Commands
Image Snap Default all Imaging Commands IMGDFT 215
Imaging Style - Decoding SNPSTY0 216
*Imaging Style - Photo SNPSTY1 216
Imaging Style - Manual SNPSTY2 216
Beeper On SNPBEP1 216
*Beeper Off SNPBEP0 216
*Wait for Trigger Off SNPTRG0 217
Wait for Trigger On SNPTRG1 217
*LED State - Off SNPLED0 217
LED State - On SNPLED1 217
Exposure (1-7874 microseconds)
*7874
SNPEXP 217
*Gain - None SNPGAN1 218
Gain - Medium SNPGAN2 218
Gain - Heavy SNPGAN4 218
Gain - Maximum SNPGAN8 218
Target White Value (0-255) *125 SNPWHT### 218
Delta for Acceptance (0-255) *25 SNPDEL### 218
Update Tries (0-10) *6 SNPTRY## 219
Target Set Point Percentage (1-
99) *50
SNPPCT## 219
Image Ship *Infinity Filter - Off IMGINF0 220
Infinity Filter - On IMGINF1 220
*Compensation Off IMGCOR0 220
Compensation On IMGCOR1 220
*Pixel Depth - 8 bits/pixel
(grayscale)
IMGBPP8 220
Pixel Depth - 1 bit/pixel (B&W) IMGBPP1 220
*Don’t Sharpen Edges IMGEDG0 221
Sharpen Edges (0-23) IMGEDG## 221
*File Format - JPEG IMGFMT6 221
File Format - KIM IMGFMT0 221
File Format - TIFF binary IMGFMT1 221
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page