honor MagicBook 14 - Getting started

2 On the Settings screen, click Bluetooth and other devices > Touchpad to:
• Enable or disable the touchpad.
• Automatically enable or disable the touchpad when a mouse is connected.
• Change the touchpad scroll direction.
• Configure touchpad gestures.
Getting started
Step 1: Connecting to a network
Click
in the lower right corner of the desktop. Select a Wi-Fi network and follow the
instructions to establish a connection.
Step 2: Activating Windows
Windows will activate automatically when you connect to the Internet for the first time. Click
> Settings > System > Activation to check if Windows has been activated.
If Windows cannot be activated, restart the computer, connect to the network, and try again. If
the issue persists, connect to a different network or wait a while before trying again.
If Windows is not activated, some features on your computer may be restricted.
Step 3: Enrolling a fingerprint
If you skipped the fingerprint enrollment process during the initial setup, click
> Settings >
Account > Sign-in options > Fingerprint recognition. Select Windows Hello Fingerprint, then
follow the instructions to enroll your fingerprint.
• Ensure that your fingertips are clean and dry, or your fingerprint may not be enrolled correctly.
• Each user can enroll up to 10 fingerprints.
Get to know your computer
7