Adjust the Color Temperature
Go to Settings > Display & brightness > Color mode & temperature, and select the color
temperature that you prefer. Default and Warm will be easier on your eyes and are
therefore recommended.
• Default: a natural tint
• Warm: a yellowish tint
• Cool: a whitish tint
• You can touch anywhere on the color circle or drag the spot to adjust the color
temperature.
Use Eye Comfo Mode
Eye mode can reduce harmful blue light and adjust the screen to
display warmer colors, relieving eye fatigue and protecting your eyesight.
• Rest your eyes for at least 10 minutes half an hour.
• Look into the distance for your eyes to have a break from the screen and to relieve eye
fatigue.
• Cultivating good eye care habits will protect your vision and prevent near-sightedness.
Enable or Disable Eye Comfo Mode
• Swipe down from the top right of the screen to open the Control Center, then turn on or
turn Eye Comfo. You can touch and hold Eye Comfo to access the settings screen.
• Go to Settings, search for HONOR Eye Comfo Display, and enable or disable Enable all
day.
Once Eye mode is enabled, will be displayed in the status bar, and the screen
will take on a yellow tint since less blue light is being emitted.
Set a Schedule for Eye Comfo Mode
Go to Settings, search for HONOR Eye Comfo Display, enable Scheduled, then set Sta
and End according to your preferences.
Customize Eye Comfo Mode
Go to Settings, search for HONOR Eye Comfo Display, enable Enable all day or set up
Scheduled, and adjust the slider under Filter level to customize how much blue light you
would like to be
Turn on Night display
Go to Settings > HONOR Eye Comfo Display, turn on or the Circadian Night Display
switch.
Settings
97
To Next Page
Loading...
