honor MagicPad 2 - Audio Channel Switching with One Tap

1 Open Camera, aim your camera at the text and stay there until appears in the
bottom right corner.
2 Tap
to extract the text.
Use Camera to Scan Documents
You can directly use the camera to scan the documents.
1 Open Camera, point it to the document, make sure that the whole page is within the
frame, then tap that appears on the bottom right of the screen.
2 Tap to enter Scan document.
3 Tap to scan.
Audio Channel Switching with One Tap
Switch to a Dierent Output Device During Playback
When playing music or videos through your earphones, you can quickly switch playback to
another device without having to unplug your wired earphones or disconnect your
Bluetooth earphones.
1
Enable Bluetooth on your tablet and connect it to wired earphones or a Bluetooth audio
device (such as Bluetooth earphones, a Bluetooth speaker, or a vehicle-mounted
device).
2
After pairing is successful, you will see the Current audio output device or Current
audio input/output device card if you swipe down the  panel on your tablet .
Touch
on the card to display the audio output devices that are currently available.
Select the device you want to switch the audio to.
If your tablet  wired earphones with a non-Type-C  the audio output channel of
your tablet will be switched from is device to the wired earphones by default.
Enjoy  Life
55