honor MagicPad 2 - Easy Projection; HONOR Print

Easy Projection
Project Your Tablet Screen Wirelessly
You can project your tablet screen wirelessly to a large display (such as a TV).
1  the following based on the model and functions of the large display:
• If the large display suppos Miracast/cast+, turn on its wireless projection switch.
• If the large display does not suppo Miracast/cast+, connect a wireless HDMI
adapter to it. Ensure that the wireless HDMI adapter is connected to a power supply.
To check whether the large display  Miracast/cast+ and how to enable wireless
projection on it, consult the user guide or customer  of the large display
manufacturer.
2
On your tablet , swipe down from the top right of the screen to open the Control Center,
and turn on .
3
Swipe down again to show all  and enable Wireless Projection. Your tablet will
 searching for available display devices.
4
In the device list, touch the name corresponding to the large display or wireless HDMI
adapter to complete the projection connection.
Alternatively, swipe down from the top middle or left of the screen to open the 
Center, and touch .
HONOR Print
Print Images and Documents
Connect Your Tablet to a Printer
1 Check the printer manual or consult with its manufacturer to verify that it is 

If it is not, consult with its manufacturer to install the corresponding app or plug-in for it
on your tablet.
2 Connect your tablet and the printer to the same Wi-Fi network using any of the
following methods:
• Connect to a Wi-Fi router: Enable Wi-Fi on the printer and connect it to the Wi-Fi
router. On your tablet , go to Settings > Wi-Fi, enable Wi-Fi, touch the same Wi-Fi
router, and follow the onscreen instructions to complete the settings.
• Connect with Wi-Fi Direct: If your printer  Wi-Fi Direct, follow the
instructions in the printer manual to enable this feature. On your tablet , go to
HONOR Connect
32