honor MagicPad 2 - Network Sharing; Cross-Device Service Use

Please refer to the actual products for the  conditions and camera sharing steps.
Network sharing
Tethering
Without network, your tablet and computer can connect to the network of your phone
without enabling the hotspot or entering the password, providing a stable network for you.
Availability
Phones, tablets and PCs  HONOR Connect. You can share the phone’s network
with the tablet and PC.
Preparations
1 Log in to the same as HONOR ID on your phone and nearby devices, and toggle on Wi-
Fi and Bluetooth.
2
Go to Settings > HONOR Connect, ensure the Tethering is enabled.
Sharing Your Phone’s Network with Nearby Devices
Method 1: When your phone and other wireless devices, such as your tablet and PC, are
without network but your phone has mobile network or Wi-Fi, follow these methods to
share the Internet connection across your devices, place the wireless device close to your
phone (ensure your phone screen is on). A pop-up reminder, "Available network found",
will appear on the wireless device. Tap CONNECT NOW to join the phone's network. If no
reminders appear,  locking and unlocking the wireless device's screen and attempt
again.
Method 2:
1
On any MagicRing device, go to the MagicRing page.
2 Click or tap the phone device ball.
3 Drag its Tethering function to your wireless device (such as your tablet and PC).
• Enable the  panel by swiping down from the top center or left of the phone
screen, tap on the right side of the Tethering card, and tap DISCONNECT to stop
Tethering. To stop Tethering, you can also go to the MagicRing page on any MagicRing
device and either tap on the Tethering card or drag the device ball out.
• It only  sharing the phone’s network with the tablet or PC.
Cross-device seice use
HONOR Connect
28