honor MagicPad 2 - Learn about the Home Screen; Control Center

Transfer Data Using Wi-Fi Direct
You can use Wi-Fi Direct to transfer data between HONOR devices. Wi-Fi Direct allows you
to transfer large  to a nearby device more quickly than Bluetooth and without having to
pair the devices.
1 On the receiving device, go to Settings > Wi-Fi and enable Wi-Fi.
2 Go to More settings > Wi-Fi Direct to  searching for nearby devices that have
enabled Wi-Fi Direct.
3 On the sending device, touch and hold to select the  you want to share, touch ,
and select Wi-Fi Direct.
 steps may be  if you are sharing  directly from an app.
4 Touch the icon of the receiving device to establish a connection, then share the 
5
On the receiving device, accept the Wi-Fi Direct transfer request.
 go to Files > My tablet > Download > Wi-Fi Direct to view the received 
Learn about the Home Screen
Explore your home screen
On the home screen, you can:
• Check the status of your tablet or view  on the status bar at the top of
screen.
• Swipe left and right to check apps, on-screen cards, and widgets.
You can pinch with two  on the home screen, and go to Home screen settings to
change the layout style.
Control Center
You can use the tablet's  functions or make quick settings in the Control Center.
Swipe down from the top right of the screen to open the Control Center. Swipe down from
the top middle or left of the screen to open the  Center. Swipe left or right on
the blank space to switch between them.
Use Shocut Switches
Tap the  switch to enable or disable its function. Tap & hold on the  switch
to quickly enter the setting page of the function (if there is a setting page). For example,
tap & hold on Wi-Fi, you can directly enter “Settings > Wi-Fi” setting page.
Slide down the bottom icon of the  switch panel to show more  switches.
Get Familiar
7