EN
cling point.
where facilities
ecycle wher e f acilitie s
or recycling point .
ecycle wher e f acilitie s
ting a draft of your lawn, inc luding all obstacles and how these should be protected.
sier to find a good position for the docking station and how to correctly place the
und your garden perimeter protecting bushes, flower beds etc. You will also need some
er and wire cutters, pliers or scissors.
ns
is equipped with collision sensors. These will detect any rigid and fixed obstacles
, such as walls, fences and garden furniture.
he Robotic Mower will stop, reverse backwards and then
continue mowing in a diff erent
, protecting the obstacles running the boundary wire accordingly is the recommended
n.
treats trees as common obstacles, but if the r oots of the tree are exposed and lower
area should be excluded using boundary wire in order to protect the tree root, cutting
els from damage.
5.Others
Paths, Driveways and Roads
If an elevated driveway crosses your lawn, better keep it outside the boundary wire.
Please allow a safety distance of 30cm between the driveway and the boundary
wire.
If the driveway and lawn are at the same level, feel free to use the boundary wire
to create a corridor. This allows your robotic mower to cross the driveway and
reach the opposite lawn.
c.Return the wire back to the perimeter（Note：the distance between two wires
requires less than 5mm and do not cross over the wires at any point ). Ensure
the distance from the wire around the object and lawn perimeter is at least 75cm
(if less than 75cm surround the object when installing the wire, leaving the object
outside of the lawn cutting area).
EN
cling point.
where facilities
NE
ycle wher e f acilitie s
NE
ecycle wher e f acilitie s
NE
or recycling point .
ecycle wher e f acilitie s
6
ting a draft of your lawn, inc luding all obstacles and how these should be protected.
sier to find a good position for the docking station and how to correctly place the
und your garden perimeter protecting bushes, flower beds etc. You will also need some
er and wire cutters, pliers or scissors.
ns
is equipped with collision sensors. These will detect any rigid and fixed obstacles
, such as walls, fences and garden furniture.
he Robotic Mower will stop, reverse backwards and the
n continue mowing in a diff erent
, protecting the obstacles running the boundary wire accordingly is the recommended
n.
treats trees as common obstacles, but if the r oots of the tree are exposed and lower
area should be excluded using boundary wire in order to protect the tree root, cutting
els from damage.
6
We recommend creating a draft of your lawn, including all obstacles and ho
This makes it easier to find a good position for the docking station a
boundary wire around your garden perimeter protecting bushes, flo wer beds
tools, like a hammer and wire cutters, pliers or scissors.
Cutting limitations
The Robotic Mower is equipped with collision sensors. These will detec t
higher than 100 mm, such as walls, fences and garden furniture.
When triggered, the Robotic Mower will stop
, reverse backwards and then co
direction. Still, pro tecting the obstacles running the boundary wire
long-term solution.
Trees
The Robotic Mower treats trees as common obstacles, but if the roots of th
than 100mm , this area should be excluded using boundar y wire in order to
blades or rear wheels from damage.
11
b.Continue circle around the objects in a clockwise direction. When going around
the object use more pegs. Remember to leave 30cm around the object to the wire!
a.Run the wire from the lawn perimeter to the object.
We recommend creating a draft of your lawn, including all obstacles and ho
This makes it easier to find a good position for the docking station a
boundary wire around your garden perimeter protecting bushes, flo wer beds
The Robotic Mower is equipped with collision sensors. These will detec t
When triggered, the Robotic Mower will stop, reverse backwards and then co
direction. Still, pro tecting the obstacles running the boundary wire
The Robotic Mower treats trees as commo
n obs tacles, but if the roots of t h
than 100mm , this area should be excluded using boundar y wire in order to
EN
cling point.
where facilities
cling point.
where facilities
EN
Original instructions
To Next Page
Loading...