HOOKII Neomow S - Basic Operation

Basic Operation
4.Cutting height adjustment
The cutting height can be adjusted by rotating the height adjustment knob.
Cutting height range from 20mm- 55mm.
14
Signal select button Select signal either P1 or P2.
5
GPS signal indicator LED will remain on only when the GPS signal is normal.
11
Power indicator LED will remain on when the ON/OFF switch is on.
12
Rain sensor button Switch rain sensor On/Off. LED remain on to allow working in the
rain; Lights out, no work in the rain.
6
OK button Used with the Start/Home button.
7
8
Charging indicator LED will flash when the robotic mower is charging.
9
Signal indicator LED will remain on when the P1/P2 is selected.
1.Start mowing
Press Unlock button ,START button and OK button in order, then the
mower
will start mowing.
3 1 7
2.Return to charging station
Press unlock button , then press HOME button and OK button
3 4 7
3.Stop the robotic mower
It is allowed to stop your robotic mower by pressing the STOP button in any
situations.The stop button has the highest priority, the robotic mower
will stop immediately in any case.
ENEN
Original instructions