HOOKII Neomow S - Description of Product

pare bl ades
mpletely before you start the
Description of Product
* Cutting height adjust knob – Adjust the height of the blade disc to set the height of
your lawn
1.Ultrasonic sensors 2.Charging port 3.Front wheel
4.Rear wheel 5.Blade disc 6.Blade
7.Battery compartment 8.Handle 9.Cutting height adjust knob
10.Start button 11.Stop button 12.Unlock button
13.Control panel 14.ON/OFF switch 15.Charging pins
16.Terminal for perimeter wire 17.Docking st
ation control panel
18.Neomow S have another choice which without Ultrasonic sensors
* Start button – Start the mower (First START button, then OK button:Abnormal
removal, continue to work)
* Stop button – Stop the mower
* Unlock button – Interlock with STOP button, press this button will unlock the stop
model.
* Wire connector-Connect/Add twire to your original perimeter wire layout or to add an
inner boundary.
pare bl ades
mpletely before you start the
5 6 7 8
15
16 17
9 10 11 12 13 14
7
2
1
3
4
18
EN
Original instructions