Hoover CLEANJET EVO Series User Manual

1 2 3
4 65
- 10 -
CHANGING THE AGITATOR / BELT*
IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply
before dismantling cleaner.
THISFEATUREVARIESACCORDINGTOMODEL
Please check the underside of your cleaner and
follow the appropriate instructions.
Turn cleaner over and remove 7
retaining screws.
Remove the agitator brackets Replace the agitator by looping the belt
round the agitator making sure it sits
securely in the belt channel.
Reassemble the agitator assembly to the
cleaner ensuring the agitator can rotate
freely.
Remove the belt cover and safety
bar.
Slide the agitator assembly out
of the cleaner and check the belt
for wear.
*Certain models only
GB

Hoover CLEANJET EVO Series Specifications

General

Brand	Hoover
Model	CLEANJET EVO Series
Category	Vacuum Cleaner
Language	English