Hoover CLEANJET EVO Series User Manual

1
3
2
4
- 8 -
EMPTYING THE DIRTY WATER TANK
WARNING:DONOTexceedthemaxfilllineonthedirtywatertank.
WARNING: Always switch the cleaner off and unplug it from the
electrical socket before emptying the dirty water tank.
IMPORTANT: Clean the filters
after each use.
WARNING: Ensure both lter are
tted to the cleaner before use.
Press the dirty water tank release lever.
Turn the tank cap anti-clockwise to open.
Remove the dirty water tank from the
cleaner.
Press the exhaust filter
release latch.
Remove the exhaust filter
chamber.
Remove the dirty water
tank from the cleaner.
Take out the pre motor
filter, then clean it.
Remove the filter from the
chamber.
Rinse under hand warm
water to remove any
debris. Allow to completely
dry before returning to the
cleaner.
Empty the tank. Rinse the tank with clean
water and allow to dry before storing the
cleaner.
CLEANING THE EXHAUST FILTER
CLEANING THE PRE MOTOR FILTER
GB

Hoover CLEANJET EVO Series Specifications

General

Brand	Hoover
Model	CLEANJET EVO Series
Category	Vacuum Cleaner
Language	English