Hoover CLEANJET EVO Series - FILLING THE CLEAN WATER TANK

4
5
1
2
3
- 4 -
Add the required amount of cleaning fluid to
a measuring jug.
(approx. 40ml per 1L of water)
The clean water tank holds the water and cleaning
solution.
IMPORTANT: Always turn the cleaner off and
disconnect from the electrical outlet before filling
the clean water tank.
NOTE: Before using this
appliance, please ensure
dirty water tank release
lever and inlet cover are
fully locked.
Press the clean water tank release latch
and remove from the cleaner.
Open the screw cap on the bottom of
the tank.
Pour the solution into the clean water
thank. Do not exceed the max fill line.
Replace the cap and return the clean
water tank to the cleaner.
Mix the solution with warm water.
(Max. temperature - 40ºC)
IMPORTANT: When filling the
cleanwatertank,donotexceed
themaxfillline.
WARNING:UseonlyHoovercarpetcleaningsolution.Usingothersolutionbrandsmaycauseexcessfoamingandwill
prevent the cleaner from working effectively.
Using other solutions may affect your warranty
FILLING THE CLEAN WATER TANK
GB