- 7 -
Before storing the cleaner:
Turn the cleaner off and disconnect from the electrical
socket.
Empty and rinse the dirty water tank. Allow to air dry.
Press the handle release button and lower the handle
for storage.
Put the flexible hose and the upholstery brush back
into the bag for storage.
Turn the cleaner off and remove the plug from the
electrical socket. Wind the power cord around the cord
storage hooks.
Rotate the storage hooks to quickly release the full
length of the power cord.
Do not run over the power cord.
Clip the power cord in the cord clip at the back of the
handle to avoid accidentally running the cleaner over
the cord and causing any damage.
Do not store the cleaner on a wood surface unless the
cleaner is completely dry.
STORAGE
CORD STORAGE
CORD CLIP
*Certain models only
GB
To Next Page
Loading...
Need help?
General
