Hoover CLEANJET EVO Series User Manual

1 2
3 4
- 9 -
Turn the cleaner upside down. Remove any
threads or debris from the brush bar.
Remove any threads or debris ensuring the
agitator can rotate freely.
Press the dirty water tank release
lever and remove the dirty water
tank. Unscrew 4 retaining screws on
the top surface.
Turn the cleaner over. Remove
the brushbar alignment brackets.
Replace the brush bar and attach to the
nozzle. Attach the alignment brackets and
assemble to the cleaner.
Unscrew 2 retaining screws located
on the underside of the detergent
nozzle. Remove the brushbar from
the nozzle.
CLEANING THE BRUSHBAR* CHANGING THE BRUSHBAR*
CLEANING THE AGITATOR*
THISFEATUREVARIESACCORDING
TO MODEL
Please check the underside of your
cleaner and follow the appropriate
instructions.
THISFEATUREVARIESACCORDINGTOMODEL
Please check the underside of your cleaner and
follow the appropriate instructions.
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity
supply before dismantling cleaner
*Certain models only
GB

Hoover CLEANJET EVO Series Specifications

General

Brand	Hoover
Model	CLEANJET EVO Series
Category	Vacuum Cleaner
Language	English