OFF
LOW
HIGH
Two-speed
models
Some cleaners are equipped with
a two-speed switch. When the
switch is pushed up as far as pos-
sible, it is in the OFF position.
LOW SPEED is to be used for less
vigorous cleaning and reduced
suction on delicate carpet, rugs,
and bare floors. Slide the switch
down one notch from OFF to LOW
speed.
HIGH SPEED is to be used for
cleaning most carpet. When the
switch is pushed down as far as
possible it is in HIGH speed.
Special features
Edge cleaning
Brushed edge cleaning is provided
on the right side of the cleaner to
remove imbedded dirt in carpet
near baseboards and furniture.
Guide the right side of the cleaner
parallel to the edge of carpet or
furniture for brushed edge
cleaning.
Standard edge cleaning is pro-
vided on the left side of the
cleaner. Standard edge cleaning
removes surface dust and litter.
NOZZLE
Adj_ for carpet
pile height
The cleaning of carpet and rugs
takes place at the nozzle. This is
the opening at the bottom of the
cleaner where the agitator is
located.
10
To Next Page
Loading...
