Hand-held Cleaner
How to use
Attach cord to cleaner
Push end of electrical cord firmly
into receptacle at the rear of
cleaner handle. Plug cord into
electrical outlet. Push ON/OFF
switch forward to turn cleaner
"ON".
Using multi-purpose
nozzle
The multi-purpose nozzle has
been built into the front of the
cleaner for added convenience. It
is designed for use on carpet, rugs,
bare floors, upholstered furniture,
mattresses, clothing, automobile
interiors and carpeted stairs.
Cleaning tools
The cleaning tools added to the
multi-purpose nozzle make this
cleaner even more versatile.
Attach the tool for the specific
cleaning task as listed below.
Crevice tool for radiators, inside
drawers, along baseboards and
edges of upholstered furniture.
Dusting brush for draperies,
tapestries, carved furniture, table
tops, books, lamps, lighting fix-
tures, venetian blinds, base-
boards, shutters and registers.
Attach cleaning tools
The cleaning tools are attached to
the nozzle by lining up the projec-
tions on the tool with the matching
openings on the nozzle. Insert tool
into nozzle and slide it until the
sides of tool and cleaner are
aligned.
To remove tool, reverse above
procedure.
21
To Next Page
Loading...
