2.12
2.8 2.9
2.10
2.11
9
WARNING
!
!
Only use recommended Hoover® Multi-Purpose
Disinfectant or Hoover® Multi-Purpose Cleaner.
■ Remove the solution tank from the BACK of the
steam cleaner (2.8)
■ Twist the cap counter-clockwise to remove (2.9)
■ DO NOT MIX HOOVER
®
MULTI-PURPOSE
DISINFECTANT OR HOOVER
®
MULTIPURPOSE
CLEANER WITH ANY OTHER CLEANING
SOLUTION
■ Fill the tank with 300ml of recommended
Hoover
®
Multi-Purpose Disinfectant or Hoover
®
Multi-Purpose Cleaner. Replace cap and twist
clockwise (2.10) until tightly secure.
■ Slide the solution tank down and snap into
place (2.11).
■ You can now disinfect or clean on demand by
turning the Clean Control dial (2.12) to the
desired setting, which will automatically dispense
the disinfectant or cleaner when pressing the
trigger. Turn to the “off” position if no Hoover
®
Mutli-Purpose Disinfectant or Hoover
®
Multi-Purpose Cleaner is desired.
WARNING
!
!
To reduce the risk of personal injury, unplug the
steamer when filling the steamer.
To Next Page
Loading...
