Note: The recovery tank has an automatic shut off to prevent the
tank from overflowing. If this is activated, the machine will not pick
up and the sound of the motor will change. The recovery tank will
need to be emptied.
OPERATION
5
Pour cleaning detergent
into tank. Top up tank to
fill line with warm water
(Max 40°C).
To remove recovery
tank, press down on
release button and pull.
Twist the tank cap into place
to secure.
Unclip latches on
recovery tank lid,
remove lid to empty.
Place the bottom of the
Clean water tank onto the
machine first and click the
top into place.
Pour dirty water
into sink.
Place the bottom of the
recovery tank onto the
machine first and click
the top into place.
Emptying the recovery tank
To Next Page
Loading...
