Why is my Hoover Ultrasonic Jewelry Cleaner leaking?
If your Hoover Ultrasonic Jewelry Cleaner is leaking, it may be because: * The cap on the solution tank is not closed tightly. Turn the power OFF, remove the solution tank, tighten the cap, and reinstall it. * The solution tank is not installed properly. Turn the power OFF, remove the solution tank, and reinstall it until it is snug.
What to do if Hoover Ultrasonic Jewelry Cleaner brush roll is obstructed?
Turn the power OFF. Ensure the brush roll is free of hair and debris.
General| Battery | ONEPWR Lithium-Ion |
|---|---|
| Battery Voltage | 20V |
| Features | Cordless |
| Included Accessories | ONEPWR Battery, Charger, Cleaning Solution |
| Warranty | 2 years |
Essential safety measures for using electrical appliances to prevent shock and injury.
Critical warnings about protecting battery packs and chargers from liquids to prevent fire or damage.
Guidelines for safe handling, storage, and operation to prevent damage and ensure user safety.
Advice on preventing product damage and warnings regarding safe battery disposal.
Step-by-step instructions for connecting and charging the battery pack.
Instructions for correctly attaching the handle to the main body of the cleaner.
Steps for installing a charged battery pack into the cleaner unit.
Procedures for removing the solution tank and filling it with water and cleaning solution.
Steps for correctly reinserting the filled solution tank into the cleaner.
Steps to prepare the cleaner for use by reclining and turning it on.
How to dispense solution and perform cleaning strokes for effective floor cleaning.
Guidance on cleaning dried and wet messes for optimal results.
Procedure for safely removing the dirty water tank and emptying its contents.
Instructions for cleaning the tank lid and float screen for optimal performance.
Steps for reassembling and installing the dirty water tank correctly.
Steps to prepare the cleaner for rinsing, add water, and run a cleaning cycle.
Instructions for removing the nozzle cover by squeezing latches.
How to lift out the brush roll and allow it to dry completely.
Cleaning the brush roll cover and brush roll chamber, then reassembling the brush roll.
Ensuring the brush roll cover is properly secured after cleaning.
How to access and remove the filter from the dirty water tank.
Instructions for washing the filter and allowing it to dry completely.
Information on the cleaner's thermal protector and what to do if it activates.
A list of compatible accessories and parts for the product.
Troubleshooting steps for when the cleaner is not spraying solution effectively.
Solutions for addressing loss of suction during operation.
Troubleshooting tips for when the brush roll fails to rotate.
Steps to diagnose and resolve issues with the machine not powering on.
Troubleshooting guide for addressing leaks from the cleaner during use.
Solutions for preventing or fixing floors that are streaked after cleaning.
What to do if the charger indicator light is flashing red, signaling a battery error.
Details on what the two-year limited warranty covers for domestic use.
Information on usage and conditions that are not covered by the product warranty.
Key terms and conditions related to the warranty, including disclaimers and limitations.
Recommendation to use genuine Hoover parts and accessories for optimal performance and warranty coverage.
To Next Page