EasyManua.ls Logo

Hoover Power Scrub Elite - Post-Tool Cleaning

Hoover Power Scrub Elite
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Using your thumb, push forward and up on the latch to remove tool.
NOTE: Do not place unit at top of stairway to avoid falling down stairs. Place unit at bottom of stairs and work up.
After Using Tools
1. Drain hose by removing the solution tank and turning the cleaner ON. Aim hose in a downward angle and
press trigger to remove excess water.
2. Turn OFF cleaner. Disconnect the hose and solution tube from cleaner.
3. Drain solution tube by placing the round end in the sink and placing the tool in sink. Press the trigger to

Other manuals for Hoover Power Scrub Elite

Related product manuals