EasyManua.ls Logo

Hoover Power Scrub Elite - Pre-Cleaning Preparation

Hoover Power Scrub Elite
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Crevice Tool*: Great for use around baseboards and hard to reach areas.
2-in-1 Antimicrobial Tool*: Allows you to choose between two inserts. The rubber nub insert is for
unpleasant stain removal and hygienic clean-ups. The bristle insert is for tough scrubbing power.
Tools vary per model. Accessories not included with your model may be purchased separately by visiting
Hoover.com.
Before you begin Cleaning
Vacuum carpet and upholstery thoroughly with a Hoover vacuum before use.
Don’t use the carpet cleaner as a traditional vacuum cleaner.
Use your Hoover carpet cleaner only if upholstery fabric is marked with a “W” (for “wet” clean) or “S/W” (for
“solvent/dry” or “wet” clean). Don’t clean fabric marked “S” (“solvent/ dry” clean only).
Test for colorfastness in a small, hidden area. Gently rub surface with a dampened white cloth. Wait ten minutes
and check for color removal or bleed with a white paper towel.
Move furniture out of area to be cleaned. Place aluminum foil or wax paper under legs of furniture too heavy to
move to prevent wood finishes from staining carpet. Pin up furniture skirts and draperies.
Pretreat spots and heavy traffic areas with a Hoover® Cleaning Solution*. See the “Cleaning Solutions” section.
Available at additional cost if not included with your model.

Other manuals for Hoover Power Scrub Elite

Related product manuals