Hoover Rewind - Cleaning the Cyclonic Filter Assembly

11
Pull the cyclone
assembly out.
Use the Dusting Brush
to clean off assembly
debris.
Replace the cyclone
assembly making
sure the tabs align.
Then twist to lock dirt
cup lid.
Remove the dirt cup.
Twist the lid open.
2
Keep your Rewind Running Properly:
Cleaning Cyclonic Filter Assembly
Place the cup back in,
bottom first,
and pivot into place.
It'll click.
WARNING
To reduce the risk
of personal injury - Unplug
before cleaning or servicing.
Do not use vacuum without
dirt cup or filters in place.
4
3
1