VACUUM DESCRIPTION
1. D-Grip Handle
2. Handle Release Button
3. Handle Wand
4. Dirt Cup Release Button
5. Carry Handle
6. Dirt Cup
7. Pre-Metor Filter
8. Brushroll Window
9. Accessory Hose
10. Rinsable Filter Access
11. ON/OFF Power Switch
12. Brushrell On/Off Switch
13. Cord Release
14. Cord
15.2-in-1 Combination Tool
16. Accessory Hose Access
17. Nozzle Hose Access
18. Furniture Guard
19. Filter made with HEPA media
20. Air Valve Dial
21. Handle Wand Release Button
22. Air-Powered Hand Tool*
J
S
18 '_-
8
21
--13
--14
=15
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
This cleaner is intended for household use.
*Available on select models only
CORD STORAGE
2.2 Wrap cord on
cord hooks for con-
venient storage.
Attach the plug end
to the cord.
2.3 Twist upper cord
hook (D) to allow
cord to be released.
HANDLE POSITIONS
2.4 The handle of your
cleaner has two
positions: upright for
storage and when
using cleaning tools;
operating position for
general operation on
carpet and floors; hold
nozzle with foot (E)
and pull handle back.
ON-OFF SWITCH
A
2.5 Plug cord into elec-
trical outlet.
To turn vacuum ON,
push ON!OFF switch (A)
once. To turn vacuum
OFF, push switch again.
To turn brushroll ON,
push ON!OFF switch (B)
once. To turn brushroll
OFF, push switch again.
CARRYHANDLE
2.6 The cleaner can be
moved by using the
carry handle (C).