Hoover UH72460 - User Manual

Questions and Answers

R
Rhonda RivasJul 27, 2025
Why is my Hoover UH72460 not sucking?
- J
  Jesse PhelpsJul 27, 2025
  There are several reasons why your Hoover Vacuum Cleaner might have weak or no suction: * The washable filter and/or HEPA filter may be dirty. * The dust cup could be full or obstructed. * The belt might be broken or worn. * The brush roll or hose could be obstructed. * The automatic shut-off device of the brush roll might be activated. To resolve this, ensure that you clean the filters, empty the dust cup, replace the belt if needed, check for and clear any obstructions in the brush roll or hose, and try pressing the ON/OFF switch twice.
R
Randall YuAug 1, 2025
What to do if my Hoover UH72460 Vacuum Cleaner won't turn on?
- J
  Joseph BlackwellAug 1, 2025
  If your Hoover Vacuum Cleaner isn't turning on, consider these potential causes: * The power cord may not be fully plugged in. Ensure the cord is securely pushed into the outlet. * A fuse might be blown, or a circuit breaker tripped. Replace the fuse or reset the breaker. * The thermal protector may be activated. Unplug the vacuum and allow it to cool for 30 minutes to reset the thermal protector. * The automatic shut-off device of the brush roll might be activated. Try pressing the ON/OFF switch twice.
E
ellisgregoryAug 8, 2025
How to fix a Hoover Vacuum Cleaner brush roll that won't spin?
- J
  John PriceAug 8, 2025
  If the brush roll on your Hoover Vacuum Cleaner isn't spinning, check these two things: * The brush roll switch is in the off position. Press the brush roll on/off switch to turn it on. * The brush roll is obstructed. Remove any debris from the brush roll.
D
Dustin BeckAug 13, 2025
Why does my Hoover UH72460 Vacuum Cleaner smell like burning?
- M
  Michelle WilliamsAug 13, 2025
  A burning smell from your Hoover Vacuum Cleaner could be due to: * A broken or stretched belt. If this is the case, the brush roll belt needs replacing. * An obstruction in the brush roll. Clear any debris from the brush roll.
C
Candice SmithAug 20, 2025
Why is my Hoover UH72460 spitting out dust?
- S
  Sarah GriffithAug 20, 2025
  If your Hoover Vacuum Cleaner is emitting dust, it might be due to: * A full dust cup. Empty the dust cup. * The dust cup not being installed correctly. Review how to remove and reinstall the dust cup. * The hose not being installed correctly. Review how to remove and replace the hose. * The washable filter and/or HEPA filter not being completely installed. Recheck the filter removal and cleaning instructions.