Hoover UH72450 - User Manual

Other manuals for Hoover UH72450

Owner's Manual24 pages

Questions and Answers

M
Mr. Travis ChaseJul 26, 2025
Why Hoover UH72450 Vacuum Cleaner won't run?
- S
  sanchezyolandaJul 26, 2025
  There are several reasons why your Hoover Vacuum Cleaner might not run: * The power cord may not be firmly plugged into the outlet. Ensure it is securely plugged in. * There may be no voltage in the wall plug. Check the fuse or breaker in your home. * A fuse may have blown or a breaker tripped. Check the fuse or breaker and replace the fuse or reset the breaker if necessary. * The thermal protector may have activated. Unplug the vacuum and allow it to cool for 30 minutes to reset the thermal protector. * The automatic brushroll shut-off may be engaged. Press the brushroll ON/OFF switch twice.
T
Tammy RuizAug 3, 2025
Why Hoover Vacuum Cleaner has no suction?
- M
  Mr. Brian Dickerson DDSAug 3, 2025
  If your Hoover Vacuum Cleaner has low suction or won’t pick up, it could be due to: * A dirty rinsable filter or HEPA media filter. * A full or clogged dirt cup. * A clogged brushroll or hose. * The automatic brushroll shut-off being engaged. Check for obstructions or press the brushroll ON/OFF switch twice. * The valve being in the wrong mode. Change the valve to the appropriate mode.
E
Emily CampbellAug 10, 2025
What to do if dust escaping from Hoover UH72450 Vacuum Cleaner?
- J
  James FieldsAug 10, 2025
  Dust escaping from your Hoover Vacuum Cleaner can be due to: * A full dirt cup. Empty the dirt cup. * The dirt cup not being installed correctly. Review the dirt cup removal and replacement. * The hose not being installed correctly. Review the hose installation. * The rinsable filter or HEPA media filter not being installed completely. Review the filter removal and cleaning.
J
John WardAug 18, 2025
How to fix Hoover Vacuum Cleaner brushroll that will not turn?
- W
  wmcguireAug 18, 2025
  If the brushroll on your Hoover Vacuum Cleaner won't turn, it could be due to: * The brushroll switch being off. Press the brushroll on/off switch. * The brushroll being clogged. Clear or remove debris from the brushroll.

Summary

Important Safety Instructions

Vacuum Assembly

Attach Handle

Step-by-step guide for connecting the handle wand to the vacuum base.

Attach Dirt Cup

Procedure for securing the dirt cup to the vacuum body.

How to Use

On-Off Switch

Details on operating the power and brushroll on/off switches.

Maintenance

Dirt Cup: When to Empty

Dirt Cup: How to Empty

Filters: When to Clean

Rinsable Filter: How to Clean

Filter Made With HEPA Media: How to Clean

Steps for cleaning the HEPA media filter, including warnings.

Cyclonic Filter Assembly: How to Clean

Brushroll: How to Clean

Guide to cleaning debris and hair from the brushroll.

Air-Powered Hand Tool: How to Clean

Instructions for cleaning the air-powered hand tool, including removing debris.

Troubleshooting

Vacuum wont run

Addresses issues with the vacuum failing to start and provides solutions.

Vacuum wont pick up or Low suction

Solutions for reduced suction or the vacuum not picking up dirt.

Dust escaping from vacuum

Troubleshooting steps for dust leaking from the vacuum cleaner.

Brushroll will not turn

Guidance for when the brushroll fails to rotate.

Hoover UH72450 Specifications

General

Style	upright vacuums
Floor Type	all floors
Cord Length	30 inches
Filter	hepa media
Washable Filter	yes
Brush Roll Shut-Off	yes
Bagless	yes
?leaning Area	11.5 inches
Voltage	120 volts
Current	11 amperes