To Next PageTo Next PageHow to fix a Hoover Vacuum Cleaner that won't turn on?
If your Hoover Vacuum Cleaner won’t run, try these solutions: 1. Make sure the power cord is firmly plugged into the outlet. 2. Check the fuse or breaker in your home. Replace the fuse or reset the breaker if needed. 3. The thermal protector may have activated. Unplug the vacuum and let it cool for 30 minutes to reset the thermal protector.
What to do if dust is escaping from my Hoover UH70800?
If dust is escaping from your Hoover Vacuum Cleaner, consider the following: * The dirt cup might be full. Empty the dirt cup. * The dirt cup might not be installed correctly. Review the dirt cup removal and replacement instructions. * The hose might not be installed correctly. Review the hose installation instructions. * The rinsable filter or HEPA media filter might not be installed completely. Review the filter removal and cleaning instructions.
What to do if the brushroll on my Hoover Vacuum Cleaner's powered hand tool won't turn?
If the powered hand tool brushroll on your Hoover Vacuum Cleaner won’t turn: * You might be applying too much pressure to the tool. Continue using the tool, but apply light pressure. * There might be a blockage. Remove the blockage. * The vacuum suction might be low. Check the items under 'Vacuum won’t pick or Low suction.'
Why does my Hoover Vacuum Cleaner smell like it's burning?
If you detect a smoky or burning smell from your Hoover Vacuum Cleaner: * The belt might be broken or stretched. Replace the brushroll belt. * The brushroll might be clogged. Clear or remove debris from the brushroll.
General| Brand | Hoover |
|---|---|
| Model | UH70800 |
| Category | Vacuum Cleaner |
| Language | English |
