Hoover UH70805RM - User Manual

Questions and Answers

H
Heather QuinnAug 2, 2025
Why Hoover Vacuum Cleaner has no suction?
- P
  Patricia HardyAug 2, 2025
  There are several reasons why your Hoover Vacuum Cleaner might have low suction. The rinsable filter or HEPA media filter could be dirty. The dirt cup might be full or clogged. The belt could be broken or worn. The brushroll or hose could be clogged, or the carpet height setting might be incorrect. Addressing these potential issues should restore suction.
M
mkellyAug 6, 2025
How to fix Hoover Vacuum Cleaner that won't turn on?
- T
  timothyfranklinAug 6, 2025
  If your Hoover Vacuum Cleaner won’t run, there are a few things to check: 1. Make sure the power cord is firmly plugged into the outlet. 2. Check the fuse or breaker in your home and replace the fuse or reset the breaker if necessary. 3. The thermal protector may have activated. If so, unplug the vacuum and allow it to cool for 30 minutes, which will reset the thermal protector.
E
Erik FitzgeraldAug 11, 2025
What to do if dust is escaping from my Hoover UH70805RM?
- B
  Brian WagnerAug 11, 2025
  If dust is escaping from your Hoover Vacuum Cleaner, it could be due to several reasons. The dirt cup might be full. The dirt cup or the hose might not be installed correctly. Also, the rinsable filter or the filter made with HEPA media might not be installed completely. Addressing these potential issues should resolve the problem.
S
Shelley CookAug 16, 2025
What to do if the brushroll on my Hoover UH70805RM Vacuum Cleaner's powered hand tool won’t turn?
- A
  Alan DavidsonAug 16, 2025
  If the brushroll on your Hoover Vacuum Cleaner's powered hand tool won’t turn, it could be due to applying too much pressure to the tool, a blockage, or low vacuum suction. Try using the tool with light pressure. Remove any blockage. Check items if the vacuum won’t pick up or has low suction.
P
Patricia GravesAug 21, 2025
Why does my Hoover UH70805RM Vacuum Cleaner smell like it's burning?
- J
  Jessica SmithAug 21, 2025
  A smoky or burning smell from your Hoover Vacuum Cleaner can be caused by a broken or stretched belt, or a clogged brushroll. Consider replacing the brushroll belt and clearing any debris from the brushroll.
P
pblankenshipAug 26, 2025
Why is my Hoover UH70805RM hard to push?
- J
  Jimmy AcostaAug 27, 2025
  If your Hoover Vacuum Cleaner is difficult to push or won’t move forward, the carpet height setting might be incorrect. Adjust the carpet height adjustment knob to the appropriate setting for the carpet you are cleaning.

Summary

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF DAMAGE

1. VACUUM ASSEMBLY

ATTACH HANDLE

ATTACH DIRT CUP

2. HOW TO USE

ON-OFF SWITCH

How to operate the vacuum's power switch.

CARPET HEIGHT ADJUSTMENT

Guide to adjust the vacuum's height setting for different carpet types.

4. MAINTENANCE

DIRT CUP

Instructions on when and how to empty and clean the dirt cup.

FILTERS: WHEN TO CLEAN

Guidance on filter maintenance, including cleaning the rinsable filter.

Filter Made With HEPA Media: How to Clean

BRUSHROLL: How to Clean

Steps to clean the brushroll, including removing debris and hair.

HOSE: How to Clean

BELT

5. TROUBLESHOOTING

Hoover UH70805RM Specifications

General

Style	upright vacuums
Color	gray
Floor Type	carpet, bare floor
Dust Bin Capacity	0.4 gallons
Cord Length	25 feet
Carpet Height Adjustments	yes
Automatic Cord Rewind	no
Filter	hepa media, reusable
Washable Filter	yes
Pet Mode	no
Hypoallergenic	no
Brush Roll Shut-Off	no
Bagless	yes
?leaning Area	13.5 inches
Brushes and Accessories	turbo tool; crevice tool; dusting brush
Voltage	120 volts
Current	11 amperes