Hoover UH70140 - User Manual

Questions and Answers

N
Nathan ChaseJul 30, 2025
Why Hoover Vacuum Cleaner has low suction?
- J
  Johnny NorrisJul 31, 2025
  If your Hoover Vacuum Cleaner isn't picking up dirt, or if you notice low suction, several factors could be the cause. Start by checking if the Rinsable Filter and/or the filter made with HEPA media is dirty and clean it. Also, the dirt cup might be full or clogged, so empty it. A broken or worn belt can also cause this issue, so replace it if necessary. Check the brushroll and hose for clogs. Ensure that the carpet height setting is correct for your carpet type. Finally, make sure the Suction Only Mode is turned off by stepping on the Brushroll ON/OFF Pedal.
D
Dr. Mary Charles MDAug 5, 2025
How to fix Hoover UH70140 that won't turn on?
- W
  William RobbinsAug 5, 2025
  If your Hoover Vacuum Cleaner won’t turn on, there are a few things you can check. First, make sure the power cord is firmly plugged into the outlet. Second, check your home's fuse or breaker and replace the fuse or reset the breaker if needed. Lastly, the Thermal Protector may have activated; unplug the vacuum and allow it to cool for 30 minutes to reset it.
W
Walter Ryan DVMAug 11, 2025
Why is dust escaping from my Hoover UH70140 Vacuum Cleaner?
- P
  pburnettAug 11, 2025
  If dust is escaping from your Hoover vacuum cleaner, it could be due to several reasons. First, check if the dirt cup is full and empty it. Ensure the dirt cup is correctly installed. Also, verify that the hose is properly installed. Lastly, make sure the rinsable filter and/or the filter made with HEPA media are completely installed.
D
Dana MatthewsAug 17, 2025
Why Hoover Powered Hand Tool brushroll won’t turn?
- J
  Jeffrey GuerraAug 18, 2025
  If the powered hand tool brushroll on your Hoover Vacuum Cleaner won’t turn, it could be due to a few reasons. You might be applying too much pressure to the tool, so try using it with light pressure. There could also be a blockage, so remove it. Additionally, low vacuum suction could be the cause; check the troubleshooting steps for 'Vacuum won’t pick or Low suction'.
Z
Zachary StanleyAug 23, 2025
What to do if my Hoover UH70140 is hard to push?
- L
  Linda YoungAug 25, 2025
  If your Hoover Vacuum Cleaner is difficult to push or won’t move forward, the carpet height setting might be incorrect. Adjust the Carpet Height Adjustment knob to the appropriate setting for the carpet you are cleaning.

Summary

Important Safety Instructions

General Safety Warnings

Reduce risk of fire, electric shock, or injury during operation.

Damage Prevention and Handling Precautions

Avoid damage and follow handling guidelines.

Vacuum Assembly

Attach Handle

Attach Dirt Cup

How to Use Your Vacuum

On-Off Switch Operation

Suction Only Mode

Using the vacuum without brushroll rotation for bare floors.

Cord Rewind and Storage

Tools and Attachments

Select Proper Tool

Maintenance Procedures

System Check Indicator

Dirt Cup Maintenance

When to Empty Dirt Cup

Optimal timing for emptying the dirt collection container.

How to Empty Dirt Cup

Step-by-step instructions for removing dirt from the cup.

Filter Cleaning Guide

Rinsable Filter Cleaning

Instructions for cleaning the rinsable filter.

HEPA Media Filter Cleaning

Brushroll Cleaning

Belt Maintenance

Troubleshooting Common Issues

Warranty Information

Limited Two Year Warranty

Hoover UH70140 Specifications

General

Model	UH70140
Category	Vacuum Cleaner
Type	Upright
Bagged/Bagless	Bagless
Cordless	No
Filtration	HEPA
Dust Capacity	1.5 liters
Power	12 Amps
Brush Roll	Yes
Tools Included	Crevice Tool, Upholstery Tool
Filter Type	HEPA