To Next PageTo Next PageWhy is my Hoover Vacuum Cleaner not picking up?
There are several reasons why your Hoover Vacuum Cleaner might have low or no suction. It could be due to: * A blockage in the airflow passages. * A full dirt cup. * A worn agitator brushroll. * A broken or worn belt. * A clogged filter. * A clogged nozzle/dirt passage hose. * Incorrect carpet height setting. * Agitator Brushroll is OFF.
What to do if my Hoover Vacuum Cleaner won’t run?
If your Hoover Vacuum Cleaner won’t run, there are a few things you can check: 1. Ensure the power cord is firmly plugged into the outlet. 2. Check the fuse or breaker in your home and replace the fuse or reset the breaker if necessary. 3. If the Thermal Protector has activated, unplug the cleaner and allow it to cool for 30 minutes. This will reset the thermal protector.
Why is dust escaping from my Hoover UH70085?
If you notice dust escaping from your Hoover Vacuum Cleaner, consider these potential causes: * The dirt cup may be full. * The dirt cup may not be installed correctly. * The hose may not be installed correctly. * The filter may not be installed completely.
What to do if my Hoover UH70085 Vacuum Cleaner powered hand tool brushroll won’t turn?
If the powered hand tool brushroll on your Hoover Vacuum Cleaner won’t turn, consider the following: * You might be applying too much pressure to the tool; try using it with light pressure. * There could be a blockage in the turbine channel; remove any blockage. * The belt may be broken or worn; replace the belt. * The cleaner suction may be low; check items under 'Cleaner won’t pick or low suction'.
Why is my Hoover Vacuum Cleaner difficult to push?
If your Hoover Vacuum Cleaner is difficult to push, it might be because the carpet height setting is incorrect. Adjust the carpet height setting to the appropriate level for the carpet you are cleaning.
Why does my Hoover UH70085 have a smoky/burning smell?
If you detect a smoky or burning smell from your Hoover Vacuum Cleaner, it is likely due to a broken or stretched belt. Replace the agitator brushroll belt.
General| Style | upright vacuums |
|---|---|
| Color | maroon, red |
| Floor Type | all floors |
| Dust Bin Capacity | 0 gallons |
| Cord Length | 28 feet |
| Hose Length | 96 inches |
| Carpet Height Adjustments | yes |
| Automatic Cord Rewind | yes |
| Filter | hepa media |
| Pet Mode | yes |
| Brush Roll Shut-Off | yes |
| Bagless | yes |
| ?leaning Area | 15 inches |
| Voltage | 120 volts |
| Current | 12 amperes |
Weight and Dimensions| Length | 13 inches |
|---|---|
| Height | 45 inches |
| Width | 15 inches |
| Net Weight | 22 pounds |
Provides crucial warnings to prevent fire, electric shock, or injury during operation.
Instructions on when and how to empty and clean the vacuum's dirt collection cup.
Procedures for cleaning or replacing the cyclonic, rinsable, and HEPA filters.
Instructions for inspecting and replacing the drive belt for the brushroll.
Guidance on checking brush condition and replacing the agitator brushroll.
Steps to identify and remove obstructions in the vacuum's airflow path.
