Why does my Hoover UH72400 Vacuum Cleaner have low suction?
If your Hoover Vacuum Cleaner has low suction or isn't picking up well, there might be several reasons: * The dirt cup might be full or clogged. * The brushroll or hose could be clogged. * The filter might be dirty. * The automatic brushroll shut-off may be engaged. Press the brushroll ON/OFF switch twice. * The belt might be broken or worn.
How to fix a Hoover UH72400 Vacuum Cleaner that won't turn on?
If your Hoover Vacuum Cleaner won't run, check these potential causes: 1. Ensure the power cord is firmly plugged into the outlet. 2. Verify there is voltage in the wall plug by checking the fuse or breaker in your home. 3. Check for a blown fuse or tripped breaker and replace or reset it. 4. The thermal protector may have activated; unplug the vacuum and allow it to cool for 30 minutes to reset. 5. The automatic brushroll shut-off may be engaged. Press the brushroll ON/OFF switch twice.
Why is dust escaping from my Hoover UH72400?
If dust is escaping from your Hoover Vacuum Cleaner, consider these possibilities: * The dirt cup might be full. * The dirt cup might not be installed correctly. * The hose might not be installed correctly. * The filter might not be installed completely, or it might be missing.
What to do if the brushroll on my Hoover UH72400 Vacuum Cleaner will not turn?
If the brushroll on your Hoover Vacuum Cleaner won't turn, here are a few things to check: 1. Make sure the brushroll switch is turned on. 2. The brushroll may be clogged. Clear any debris from the brushroll. 3. Unplug the unit and wait 30 minutes.
Why does my Hoover UH72400 Vacuum Cleaner smell like it's burning?
If you notice a smoky or burning smell from your Hoover Vacuum Cleaner, it could be due to: * A broken or stretched belt. * A clogged brushroll. Clear any debris from the brushroll.
What to do if the air-powered hand tool on my Hoover UH72400 Vacuum Cleaner won't turn?
If the Air-Powered Hand Tool on your Hoover Vacuum Cleaner isn't turning, check the following: 1. You might be applying too much pressure to the tool. Try using it with light pressure. 2. There might be a blockage. Remove any blockages. 3. There might be low vacuum suction.
Instructions to connect the handle to the vacuum base.
Explains operation of power and brushroll switches.
Guidance on when and how to empty dust container.
Step-by-step instructions for removing and emptying dirt cup.
Details process for washing and drying rinsable filter.
Instructions for cleaning HEPA filter without washing.
Instructions for cleaning debris/hair from brushroll.
Information about belt condition and replacement.
General| Style | upright vacuums |
|---|---|
| Color | silver/green, multi |
| Floor Type | all floors |
| Filter | hepa media |
| Washable Filter | yes |
| Brush Roll Shut-Off | yes |
| Bagless | yes |
| ?leaning Area | 11.5 inches |
| Voltage | 120 volts |
| Current | 11 amperes |
Weight and Dimensions| Length | 14 inches |
|---|---|
| Height | 44 inches |
| Width | 12 inches |
| Net Weight | 13 pounds |
To Next Page
