Need help?Do you have a question about the horiba LaquaTwin B-771 and is the answer not in the manual?
General| Brand | horiba |
|---|---|
| Model | LaquaTwin B-771 |
| Category | Measuring Instruments |
| Language | English |
Lists all components provided with the HORIBA LAQUAtwin B-771 conductivity meter.
Details replacement sensors and calibration solutions available for separate purchase.
Provides essential safety instructions for handling the meter and its sensitive sensor.
Details crucial safety precautions for battery usage, charging, and replacement.
Covers safety advice for contact with calibration fluids and other general operational safety.
Step-by-step guide for the proper installation and removal of the meter's batteries.
Instructions on how to correctly connect and disconnect the conductivity sensor from the meter.
Procedures for turning the conductivity meter on and off using the designated switch.
Provides guidelines on how to properly clean and store the meter after use.
Steps for preparing the sensor electrode before first use or after periods of disuse.
Explains available calibration points and essential precautions for accurate measurements.
Detailed step-by-step instructions for executing a single-point calibration of the meter.
Detailed step-by-step instructions for executing a two-point calibration of the meter.
Describes various methods for preparing and setting samples in the measurement cell.
Guides on how to perform measurements, with or without using the reading locking function.
Instructions on how to select and change the measurement unit for conductivity or TDS.
Guide on how to view the ambient temperature measured by the meter's internal sensor.
Procedure to select between one-point and two-point calibration modes.
Procedure to reset all settings and calibration data to factory default values.
Instructions on how to access and display the current software version of the meter.
Answers to common questions regarding sensor life, calibration, and general operation.
Details the technical specifications and performance characteristics of the conductivity meter.
To Next Page