42
TR10A108-B RE / 02.2013
Technical Data16
Mains voltage 230 / 240 V, 50 / 60 Hz
Stand-by Approx. 1 W
Protection category Only for dry rooms
Automatic safety cut-out Is automatically taught in for
both directions separately
End-of-travel position
cut-out / force limit
Self-learning, wear-free, as it
is designed without
mechanical switches,
additionally integrated run
time limitation to approx.
60 s. Automatic safety
cut-out, readjusting at every
door run
Rated load See data label
Pull and push force See data label
Motor Direct current motor with hall
sensor
Transformer With thermal protection
Connection No-screw connection
technology for external
equipment with 24 V DC low
safety voltage, such as
internal and external buttons
with impulse operation
Special functions Stop / off switch can be ō
connected
Photocell or closing ō
edge safety device can
be connected
Option relay for warning ō
lamp, additional external
illumination can be
connected via HCP bus
adapter
Quick release Actuated from inside with
pull cord in the event of a
power failure
Universal fittings For up-and-over doors and
sectional doors
Door travel speed In ō CLOSE direction
max. 14 cm / s
1)
In ō OPEN direction
max. 22 cm / s
1)
Garage door operator
airborne sound emission ≤ 70 dB (A)
Operator boom Extremely flat at 30 mm, with
integral door security kit and
maintenance-free toothed
belt
Depending on operator type, door type, door size and door leaf 1)
weight
ENGLISH
To Next Page
Loading...