Hotone Ampero Control Quick Start Guide

1. Set your Ampero Control depending on your needs (see above), and
then disconnect your Ampero Control from Ampero Control app.
2. Connect your Ampero One’s USB jack to your mobile device with a
USB OTG cable.
3. Press and hold footswitch 2 and 3 to enable Bluetooth Pair Mode.
4. Launch your Bluetooth MIDI bridging app, then pair with your
Ampero Control following the app instructions to make sure the MIDI
messages can be correctly transferred.
If everything is correctly set, Ampero One will respond to your
operations on Ampero Control.
USE WITH AMPERO ONE
Since Ampero One has no MIDI IN jack, you need a mobile device with
Bluetooth MIDI bridging app (e.g. iOS: midimittr, Android: MIDI BLE
Connect)* to control Ampero One.
You can directly import Ampero templates or refer
to Ampero’s MIDI Control Information List. When
editing MIDI messages on your own, please
remember to toggle “Bluetooth” in “Output To”
option:
OTG
*Hotone Audio has no affiliation with mentioned 3rd party apps or their developers, which are
cited just as examples.

Hotone Ampero Control Specifications

General

Type	MIDI Foot Controller
Footswitches	4
Connectivity	MIDI, USB
Expression Pedal Inputs	2
USB	USB Type-C
Display	LCD
Power Supply	9V DC
MIDI I/O	In/Out
Weight	1.18 kg