Hotone Ampero Control Quick Start Guide

1. Connect your Ampero Switch to EXP/CTRL 1 or 2 jack on your Ampero
Control with a TRS cable:
USE WITH AMPERO SWITCH
2. Select CTRL 1/2 depending on your connections.
3. Set “Type” to “Dual FS”.
4. Edit footswitch functions/MIDI messages (see above).
You can use Ampero Switch as external MIDI footswitches. External
footswitch functions are the same as footswitch 1-4 on your Ampero
Control.

Hotone Ampero Control Specifications

General

Type	MIDI Foot Controller
Footswitches	4
Connectivity	MIDI, USB
Expression Pedal Inputs	2
USB	USB Type-C
Display	LCD
Power Supply	9V DC
MIDI I/O	In/Out
Weight	1.18 kg