Hotpoint FDYF11011K User Manual

Indesit Company UK Ltd
© 2015 Reg. Office: Peterborough PE2 9JB Registered in London: 106725
Service
Information
Hotpoint
Freestanding
DISHWASHER
with
Digit Display
using
DEA700 & DEA603
controls
Models Covered:
Comm
Model: Code
FDYF11011G 82748
FDYF11011K 82752
FDYF11011P 82746
5407865 Issue 1 Feb. 2015.
SM004058 ~ C00309783

Hotpoint FDYF11011K Specifications

General

Brand	Hotpoint
Model	FDYF11011K
Category	Dishwasher
Language	English

Summary

Safety Notes and Servicing Advice

Production Changes

Notes on changes in electronic modules (DEA700 to DEA603) during production.

Product and Technical Specifications

Product Fiche

Details the product's specifications, efficiency, and consumption.

Technical Specifications

Lists key technical parameters like energy class, noise level, dimensions, and consumption.

Fault Codes and Diagnostics

Fault Code Identification

Lists basic fault codes (F01-F15) and their possible causes for diagnostics.

Detailed Fault Code Analysis

Provides detailed fault codes, possible causes, and recommended checks for troubleshooting.

Wiring Diagrams

DEA700 Module Wiring

Electrical schematic and component key for the DEA700 control module.

DEA603 Module Wiring

Electrical schematic and component key for the DEA603 control module.

General Information and Console Operation

Appliance Overview and Levelling

General information, features, and instructions on levelling the dishwasher.

Console Panel Functions

Description of buttons, display, indicators, and programme/option usage.

Delay Start and Stand-by Modes

How to use delay start and the machine's stand-by behaviour.

Machine Settings and Programmes

Basic Machine Use

Guide to setting programmes, water hardness, and rinse aid.

Programme Guide

Component Descriptions

Control Module and Water Level Sensing

Describes Control Module, Pressure Switch, and Anti Flood Device.

Water Inlet and Circulation

Details Fill Valve, Water Turbine, Wash Pump, and Drain Pump.

Dispenser, Drying, and Indicators

Describes Dispenser, Drying System, and Low Salt/Rinse Aid Warnings.

Additional Components and Systems

Information on Aqua-Stop, Heater, Thermistor, Regeneration, Air Break, and Filters.

Auto Test Cycle

Activation and Sequence

Steps to activate the auto test cycle and details of the sequence.

Dismantling Instructions

Safety and Exterior Dismantling

Safety precautions and procedures for removing outer panels and worktop.

Internal Component Dismantling

Steps for removing module, base unit, motor, pumps, and switches.

Water System and Display Dismantling

Procedures for dismantling water softener, air-break, filters, and display board.

Module Programming

Programming Access and Methods

Location of access panel and methods for programming the main board.

Smartcard Programming Procedure

Detailed steps for programming the module using a smart card and reader.

General Dishwashing Information

Addressing Wash Result Issues

Factors influencing wash results like food remains, blockages, and detergent.

Dishware Appearance Problems

Causes and prevention of white coating, cloudy film, pink dishes, and tarnishing.

Drying and Utensil Issues

Factors affecting drying efficiency and causes of utensil damage/staining.

Internal Staining and Marks

Causes of internal staining (orange/pink, rainbow) and black marks on china.