HotSpring Bolt Instructions

Page 8 Pre-Delivery Instructions
GLOW
®
(Model GLW)
Dimensions
NOTE: All dimensions are approximate; measure your spa
before making critical design or pathway decisions.
NOTE: Watkins Manufacturing Corporation recommends that the Glow be installed on a minimum 4” (10 cm) thick
reinforced concrete pad or structurally sound deck able to support the “dead weight” found in the spa specification
chart.
WARNING: The Glow must not be shimmed in any manner.
Glow
76" (193cm)
84"
(213.4cm)
3.5" (8.9 cm)
29.5" 74.9 cm)
33" (83.8 cm)
65 1/2" (166.4 cm)
19” (48.3 cm)
61.5” (156.2 cm)
33” (83.8 cm)
(Bottom view)
(Front view)
Upside Down View
of Spa
Drain
Door
Electrical Cutout 1.5" (4.4 cm)
Door
Door

HotSpring Bolt Specifications

General

Brand	HotSpring
Model	Bolt
Category	Hot Tub
Language	English