HotSpring Envoy KKE User Manual (English)

Questions and Answers:

C
Craig SchmidtAug 9, 2025
What to do if my HotSpring Hot Tub does not heat but jets and light operate?
- W
  Wendy JacksonAug 9, 2025
  If your HotSpring Hot Tub's jets and light are working, but the spa is not heating, it could be due to: * An open integrated pressure switch: Check for clogged filters. The integrated pressure switch will reset when the flow of water through the heater has been restored. Call for service if the heater trips frequently. * The circulation pump thermal cut-off tripped: Check for clogged filters or air locks in plumbing. Disconnect power to the spa and allow the circulation pump to cool. The circulation pump thermal cut-off will reset when the pump has cooled and power is reapplied. Call for service if the circulation pump thermal cut-off trips frequently.
D
Dawn EscobarAug 14, 2025
What to do if my HotSpring Hot Tub is completely inoperative?
- B
  burnettronaldAug 15, 2025
  If your HotSpring Hot Tub is completely inoperative, there are several potential causes: * A power failure: Check your power source. * The GFCI tripped: Reset the GFCI. If it will not reset, call for service. * The heater high-limit thermostat tripped: Disconnect power for at least thirty seconds to reset the heater high limit. If it continues to trip, check for clogged filters. If it still continues, call for service. * The spa lock is activated: Deactivate the spa lock.
L
Lisa MendozaAug 21, 2025
Why are the jets weak or surging in my HotSpring Envoy KKE?
- C
  Cynthia BriggsAug 21, 2025
  Weak or surging jets in your HotSpring Hot Tub can be due to a few reasons: * The spa water level is too low: Add water. * The filters are clogged: Clean the filters. * The COMFORT CONTROL lever is closed: Open the COMFORT CONTROL lever.
S
Shawna ElliottAug 27, 2025
How to fix a MOTO-MASSAGE DX jet that is inoperative or erratic in my HotSpring Envoy KKE Hot Tub?
- L
  Lindsey BarkerAug 27, 2025
  An inoperative or erratic MOTO-MASSAGE DX jet in your HotSpring Hot Tub can be caused by: * Closed COMFORT CONTROL valves: Open the COMFORT CONTROL levers. * Clogged filters: Clean the filters.
B
Blake BergSep 2, 2025
What to do if the light is inoperative in my HotSpring Hot Tub?
- A
  Alicia AbbottSep 2, 2025
  If the light in your HotSpring Hot Tub is inoperative, it could be due to: * Spa lock activated: Deactivate spa lock. * Faulty light wiring or assembly: Replace the light assembly.